中文版    |    ENGLISH
Hotline:022-87185626-800
Current location:Product >  Acid steam cleaning system
Product
Laboratory glassware washer Racks & Baskets Acid steam cleaning system Acid purification system Automated Homogenizing System Other

Acid1000F

Dateline:2017-03-06
Viewnum:1416

Product Introduction
  Cleaning various items used in ultra-trace analysis work is a critically important laboratory routine. 
  Acid1000 Acid steam cleaning system is a fully automated, selfcontained, acid steam cleaning system for trace metal analysis accessories. 
  Clean various items of small bottles, utensils and ICP/MS accessories which are made by glass, quartz, PFA, PTFE, TFM and other materials
  •Fast, convenient and fully automate
  •Perfect accessory for your microwave digestion system
  •No operator's exposure to acid vapors
  •Unattended operations

Work Environment
  Voltage:220VAC±10%
  Humidity:20%-80%
  Power:1300W
  Dimensions:48D×50W×108H(cm)
  Acid consuming volume:500ml 

Characteristic
  Acid1000 Acid steam cleaning system
  Best cleaning quality of all PTFE, TFM, glass, and quartz ultra-trace accessories, including microwave digestion vessels and ICP/ICP-MS accessories.
  Temperature Control: The cleaning temperature is 0~ 280℃ adjustable.
  Program: 10 programs for selection which can set the best cleaning method of various items.
  With steam return runners, can improve the steam return speed, shorten the cleaning time.
  Forced negative pressure exhaust device, can be contacted with the exhaust pipe in the lab, can be used alone or put it in the fume hood.
  Have pressure safety protection, with three steam filter breathing holes on the top of the cleaning cavity , provide the protection for internal and external pressure balance . 
  Numbers of cleaning:standard cleaning numbers 49 or 30 ,cleaning numbers can be customized.

How to use
  Place the items to be cleaned in the acid steam cleaning system, program the time and temperature required, then press start.
  Freshly distilled acid vapors will then continuously reflux within the sealed unit, thoroughly leaching any metal contaminants from the items. 
  After the cleaning cycle is complete, the items are cooledand stored until needed.